 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MIC-5301 AdvancedTCA(R) Dual-Core Low Voltage Intel(R) Xeon(R) Processor Board with Two AMC Slots Features Two Dual-Core Intel(R) Xeon(R) processors LV 2.0 GHz Intel E7520(R) chipset supports 667 MHz FSB Dual channel DDR2 400 MHz ECC Registered SDRAM, configurable up to 16 GB Four 1000Base-BX ports on Fabric interface Two 1000Base-Tx ports on Base interface Two PCI Express x4 (PCIe) AMC slots with style B/B+ connector Supports optional Serial Attached SCSI (SAS) module SAS ports module to Rear-Transition Module (RTM) One serial port for IPMI on front panel Two USB 2.0 ports in front and in RTM; One 2.5" SATA/SAS HDD on RTM RoHS 2002/95/EC COMPLIANT Introduction Advantech's MIC-5301 single-slot AdvancedTCA(R) processor blade combines computing performance with I/O flexibility in a power efficient quad core, dual AMC design. Featuring two high performance Dual-Core Intel(R) Xeon(R) LV processors, the MIC-5301 facilitates the consolidation of multiple single core designs and frees up valuable system slots for increased processing power or I/O connectivity. The MIC-5301's overall design flexibility positions it for use as a common processing blade for multiple applications. As architecture re-use means gains in economies of scale, the MIC-5301 is ideally suited for a wide range of application processing needs. Two single full-size AMC sites support the use of a variety of AMC modules such as coprocessors, TCP/IP offload engines, physical disks, LAN or WAN adapters. Packet throughput is increased by enhanced fabric connectivity with four Gigabit Ethernet ports to the fabric interface in addition to the two Gigabit Ethernet ports to the base interface. An Intel E7520 Memory Controller Hub MCH and Intel 6300ESB I/O Controller Hub provide high-end server class support for the two dual-core processors. The E7520 addresses up to 16 GB of dual channel DDR2 ECC Registered SDRAM in 4 DIMM sockets. Further connectivity is supported via an optional Serial Attached SCSI (SAS) module with SAS ports connected to a Rear Transition Module mounted SAS drive. IPMI 1.5 support is assured by a PigeonPoint System(R) (PPS) Solution on a Renesas H8S/2167. Advantech offers a range of innovative ATCA customization services specifically targeted at Telecommunications Equipment Manufacturers (TEMs). Advantech's Design To Order Services (DTOS) team partners with TEMs to evaluate project requirements and develop TEM-specific solutions in order to improve overall operating costs. The MIC-5301 is an example where proven core engineering IP can be re-used as a base for a TEM specific design. Four DDR2 memory sockets Connector to Fabric & Base Interface Connector to RTM -48 V power and IPMI connector RJ-45 COM2 port for IPMI program & terminal Two AdvancedMC slots 20 Status indicators Two USB 2.0 ports RJ-45 COM1 port MIC-5301 Specifications Processor System Bus Memory Ethernet Front I/O Interface Operating System IPMC Watchdog Timer AMC Two Dual-Core Intel Xeon LV processors 2.0 GHz Intel E7520 MCH Dual 4Mbit FWHs with AMI embedded BIOS 667 MHz Dual channel DDR2 400 MHz SDRAM (72-bit ECC Registered) Configurable up to 16 GB 4 Two 10/100/1000Base-TX ports for base interface; Four 1000Base-BX ports for fabric interface (compliant Interface with PICMG 3.1 option 2) Controller BCM5715S (PCIe x4) and BCM5715C (PCIe x4) Serial (COM) 1 (RS-232, RJ-45 connector) Serial (BMC) 1 (RS-232, RJ-45 connector) USB 2.0 2 Compatibility Windows 2000; Windows 2003; Linux BMC Controller Renesas H8S/2167 IPMI Compliant with IPMI 1.5 using Pigeon Point System(R) (PPS) Solution Hardware Monitor LM93 Output System reset; system power down Interval Set in BIOS menu for 10 sec, 30 sec, 1 min and 5 min Site 2 Interface PCI Express x4 Power limit 30 watts Solid State Disk One CompactFlash socket LED Indicator 20 Storage module SAS daughter module with four ports up to 3 Gb/s for each Real Time Clock Built-in Two external SAS ports Real I/O interface Two USB 2.0 port Storage Site One 2.5" SATA/SAS HDD (HDD not included) Node blade: 294.56 x 322.25 mm (11.60" x 12.69") Dimensions (W x D) RTM: 94 x 322.25 mm (3.7" x 12.69") Node blade: 2 kg (4.41 lb) Weight RTM: 0.275 kg (0.61 lb) Operating Non-operating Temperature 0 ~ 65 C (32 ~ 149 F) - 40 ~ 70 C (-40 ~ 158 F) Humidity NA 95% @ 60 C (non-condensing) Shock 20 G 50 G Vibration (5 ~ 500 Hz) 1.5 Grms 2G PICMG 3.0 R2.0 AdvancedTCA Base Specification PICMG 3.1 R1.0 Ethernet/Fibre Channel for ATCA Systems PICMG AMC.0 R1.0 Advanced Mezzanine Card Base Specification PICMG AMC.1 R1.0 PCI Express and Advanced Switching CPU Max. Speed Chipset BIOS Front Size Bus Technology Max. Capacity Socket Miscellaneous RTM Physical Characteristics Environment Compliance Two external SAS ports 2.5" SATA or SAS HDD Two USB 2.0 ports MIC-5301 Rear Transition Module (RTM) Online Download www.advantech.com/products |
Price & Availability of MIC-5301
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |